Networked Monitoring
It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios. The securityProbe 5E has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing. Complete SNMP functions such including SNMP v3 encryption are supported.
The securityProbe 5E also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway. The web-based interface is written in PHP allowing end-user changes such as language translation. The securityProbe 5E has a battery backed time of day clock for accurate record keeping.
securityProbe 5E OnBoard Architecture
Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E. When plugged in, sensors automatically configure themselves and go 'online'. Using the either the E-sensor8, or the E-opto16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use port numbering system allows you to setup the securityProbe 5E within minutes.
- AKCP iMX25 CPU
- 128 MB OnBoard NAND Flash
- 10/100 Mbps Ethernet Port
- 1x USB 2.0 Modem Port
- 4x BNC Video Ports
- RS485 Ports
- Internal Audio Speaker
- Internal Microphone
- 8 Full AutoSense RJ-45 Ports (Maximum of 500 Sensors)
- RJ-45 Expansion Ports
Sensor Graphing
The securityProbe 5E integrates and displays graphs of all sensor data in its web-based user interface. The individual graph (day, week, month and year) for each sensor type can be customized, simply by modifying the script template used to generate a particular graph. RRD tool is used to build an embedded database of sensor data. This data can be accessed from the web interface, or downloaded to a remote PC. MRTG can be used to generate real-time graphs of sensor data on a remote website.
Connect up to 4 External BNC Digital Cameras
The securityProbe 5E can display pictures from a maximum of four Digital Cameras simultaneously in several sizes, up to 640x480 pixels resolution. AKCess Pro cameras are used in professional surveillance and CCTV monitoring systems. A built-in pan-tilt controller interface allows complete control of pan and tilt cameras using the industry standard Pelco D bus.
Notifications
Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use web based interface allows you to setup the securityProbe 5E within minutes. When online, the sensors use their 4 levels of threshold checking and report any status change.
Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via email, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network monitoring system using SNMP traps. The securityProbe 5E can automatically switch a relay on or off, wake-up or shutdown a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions.
The securityProbe 5E can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.
AKCP securityProbe 5E
The securityProbe 5E Monitoring System is compatible with all of the AKCP range of Intelligent Sensors and provides a complete environmental, access control and security monitoring solution. The securityProbe 5E has a Linux Operating System running an iMX25 CPU. An additional 2 Gigabytes SD card can be installed to provide greater storage capacity. It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios. The securityProbe 5E has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing. Complete SNMP functions such including SNMP v3 encryption are supported.
from 1295,00 Euro*
ALTERNATIV
Didactum Monitoring System 500 II With Didactum`s Monitoring System 500 II you get a proven Monitoring solution to protect your mission-critical facilities and sites. This device is applicable across sectors and suitable for Monitoring of sensitive IT infrastructure (server room / data center), as well as for production areas and technical rooms.
The Didactum monitoring system 500 II is a stand-alone monitoring device. Thanks to its full SNMP support, this monitoring system can be used with SNMP tools and Network Management Systems (NMS) such as Nagios or OpenNMS and many more. This IT monitoring device has a built-in Web server for easy configuration. It supports standard network protocols such as CAN, DHCP, HTTP, HTTPS, SNMP, SMTP, FTP, and Syslog. State changes, operating problems and critical events are reported immediately by e-mail, FTP, Syslog or SNMP. If you order the optional Quad band GSM modem (item No. 14025), this high-end monitoring system can also send critical events and alarms via SMS directly to your mobile phone. This is recommended for example in case of malfunction or failure of your network connections. Including Sensor Temperature!
from 498,00 Euro*
Request offer
Are you curious to Didactum offered securityProbe5E monitoring solution?
Then challenge today our AKCP sales team on a free, no obligation offer for you.
We are happy to assist you in planning and implementing your surveillance solution.
If desired, our engineers and consultants to take over the on-site installation of the monitoring hardware, including integration into your existing management system. We look forward to you!