AKCP dual sensor temperature and humidity
The SNMP-enabled sensor combination provides a precise measurement of the temperature and the relative humidity. Advantageously, in our view is that this combined temperature and humidity just a port of the monitoring device.
This allows you to connect the sensor to the second sensorProbe2 a further join AKCP sensor.
Purpose of AKCP Temperature and humidity sensor
- Temperature and humidity monitoring in the data center and server room
- Server Rack Monitoring / Rackmonitoring
- Temperature & humidity measurement in production environments
- Control dehumidifier / drying facilities
- Monitoring climate chamber and climate cabinet
- Temperature and humidity control in museums and archives
- Research
- Monitoring condensation
- Monitoring of refrigerators and freezers
Transmission of temperature readings to an NMS
The built-in combination sensor temperature and humidity sensors each have its own OID, so that the measured temperature and humidity levels also in network management systems (NMS) such as MRTG, Nagios, HP OpenView, IBM Tivoli, WhatsUp Gold and much more.
Of course, the current temperature and humidity can be queried over the network via snmpget command.
AKCP auto sense including disconnect alarm feature
All AKCP dual temperature and humidity sensors have an auto-sense function. Thus, the monitoring devices to automatically detect the AKCP AKCP dual sensor and the measurement of temperature and humidity is automatically started.
The user is informed by disconnect an alarm if the connection of the measuring device to AKCP combined sensor was disconnected.
AKCP Sensor Temperature / Humidity
In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
from 90,00 Euro*
Monitoring System 100 III - buy now
The advanced monitoring system 100 III is the entry level model of the high-end surveillance systems from Didactum. This monitoring appliance is designed and manucactured within the EU. The engineering and support of the Didactum monitoring systems are located in Germany.
from 239,00 Euro*
Calibration of the sensor in accordance with ISO / IEC 17025
The AKCP are dual sensor temperature and humidity, not to be calibrated before installation, as it already factory according to ISO / IEC 17025 standard has been adjusted.
A possible future post-calibration of AKCP sensor is also not required.