AKCess Pro Dual Sensor Temperature and Humidity (waterproof)

     This waterproof dual-sensor from AKCP can both temperature and relative humidity measured reliably and is designed for outdoor use and for use in damp or wet production environments.

Waterproof Dual Temperature & Humidity Sensor

The temperature and relative humidity must be controlled around the clock not just in data centers, server rooms, communications equipment or production areas. Even valuable livestock, whether in agriculture or as shown here in terrariums of zoos must  be monitored for important environmental factors.

Already with the sensorProbe2 and the waterproof Dual Temperature Sensor and humidity, the responsible staff will be informed by e-mail, via SMS (via Gateway) or SNMP traps in case of critical environmental conditions.

Purpose of AKCP Temperature and humidity sensor Waterproof

Liquids can be monitored with this sensor. The water-resistant composite temperature and humidity sensor occupies only one port of AKCP measuring device.

Purpose of the waterproof dual sensor temperature and humidity among others:

  • Temperature and humidity monitoring in outdoor areas
  • Measurement of temperature and humidity in the pharmaceutical industry
  • Control of dehumidifiers / Dehumidifiers
  • Corrosion monitoring systems and structures
  • Monitoring condensation (e.g., water works)
  • Monitoring refrigerators and freezers
  • Temperature and humidity monitoring climate cabinet / climate chamber
  • Temperature and humidity measurement in wet realitive production environments

Calibration of the water-temperature & humidity sensor

The waterproof temperature & humidity combination sensor is calibrated by the manufacturer to ISO / IEC 17025 standard - Not relevant After a subsequent calibration or maintenance.

Transmission of temperature readings to an NMS

The built-in combination sensor temperature and humidity sensors each have its own OID, so that the measured temperature and humidity levels also in network management systems (NMS) such as MRTG, Nagios, HP OpenView, IBM Tivoli, WhatsUp Gold and much more.

Of course, the current temperature and humidity can be queried over the network via snmpget command.

Auto Sense and Disconnect function

The watertight dual sensor temperature and humidity has an Auto Sense feature. This is advantageous because the network-see sensorProbe2, sensorProbe8 and securityProbe remote alarm devices this sensor automatically.

Disconnect the alarm notifies you as soon as the connection of the appliance to monitor AKCP Dual sensor in a row when any defect or tampering is interrupted.

AKCP Temperature / Humidity Sensor


In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.


from 175,00 Euro*


Monitoring System 100 III - buy now


The advanced monitoring system 100 III is the entry level model of the high-end surveillance systems from Didactum. This monitoring appliance is designed and manucactured within the EU. The engineering and support of the Didactum monitoring systems are located in Germany.


from 239,00 Euro*


Calibration of the sensor in accordance with ISO / IEC 17025

The AKCP are dual sensor temperature and humidity, not to be calibrated before installation, as it already factory according to ISO / IEC 17025 standard has been adjusted.

A possible future post-calibration of AKCP sensor is also not required.