The only monitoring system you'll ever need...

Monitor the physical environment and receive alerts of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and more.

AKCess Pro securityProbe-5ESV

Compatible with all of the AKCess Pro range of Intelligent Sensors it provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors. The securityProbe 5ESV has a Linux Operating System running an iMX25 CPU.

An additional 2 Gigabytes SD card can be installed to provide greater storage capacity. It boasts USB 2.0 connectivity with ports available to connect up to 4 USB 2.0 Digital Cameras and 1 USB Modem.

Purpose of securityProbe 5ESV Monitoring Systems:

  • Data center monitoring as part of the IT Compliance
  • Server room / network space
  • Monitoring power supply system
  • Monitoring telecommunications system
  • Monitoring key facilities and equipment (including branches)

The team of the official importer AKCP Didactum® recommends the installation of water sensors or water leakage reporting chains in business-critical infrastructures and spaces.

Even small amounts of moisture are sufficient, for example, trigger a short circuit. Heating or water pipe rupture, faulty sprinkler, leakage of air conditioning, water leakage of the heat exchanger or sinking of the water-cooled server enclosure also have a not to be underestimated loss potential.

Get timely alert before your rooms and equipment are delivered disastrous events defenseless!

Redefined IT Security - Server monitoring with securityProbe-5EVS

To monitor the safety of your business-critical areas around the clock, will be presented by the official importer AKCP Didactum Ltd. Germany now the youngest Monitoring System from manufacturer AKCess Pro: the securityProbe-5ESV. The AKCess Pro securityProbe-5ESV, official successor of Didactum TopSellers securityProbe-5E been completely re-engineered. So the securityProbe-5ESV provides a more powerful CPU and the new NAND flash memory technology.

 

As a classic IP Alarm Server for non-stop monitoring of critical infrastructures developed the new AKCess Pro securityProbe-5ESV has no additional fan and no moving storage media such as hard disks, etc. In order to achieve the highest possible reliability of securityProbe-5ESV meter, is before delivery of each securityProbe-5ESV IT Monitoring System an intensive 7-day test run subjected.

 

Networked Monitoring

It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios. The securityProbe-5ESV has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing. Complete SNMP functions such including SNMP v3 encryption are supported. The securityProbe-5ESV also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway.

 

The web-based interface is written in PHP allowing end-user changes such as language translation. The securityProbe-5ESV has a battery backed time of day clock for accurate record keeping.

 

 

Integrated Linux OS, Nagios and support of scripting languages

The AKCess Pro securityProbe-5ESV offers a full Linux operating system with Apache Web server functions and support for popular scripting languages ​​such as Per, Bash or PHP.

 

The multi-lingual web interface of securityProbe-5ESV can be changed on request to German menu. The popular Nagios network management system is already installed on the securityProbe-5ESV monitoring hardware and can be activated with a mouse click, so that an additional Nagios PC can be dispensed with.

 

Connect up to 4 External USB Digital Cameras

The securityProbe-5ESV can display pictures from a maximum of four USB Digital Cameras simultaneously in several sizes, up to 640x480 pixels resolution. AKCess Pro cameras are used in professional surveillance and CCTV monitoring systems. A built-in pan-tilt controller interface allows complete control of pan and tilt cameras using the industry standard Pelco D bus.

 

securityProbe 5ESV's OnBoard Architecture

Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5ESV. When plugged in, sensors automatically configure themselves and go 'online'. Using the either the E-sensor8, or the E-opto16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use port numbering system allows you to setup the securityProbe 5ESV within minutes.

 

  • AKCP iMX25 CPU
  • 128 MB OnBoard NAND Flash
  • 10/100 Mbps Ethernet Port
  • 1x USB 2.0 Modem Port
  • 4x USB 2.0 MJPEG Video Ports
  • RS485 Ports
  • Internal Audio Speaker
  • Internal Microphone
  • 8 Full AutoSense RJ-45 Ports (Maximum of 500 Sensors)
  • RJ-45 Expansion Ports

USB Connectivity

Whether you are connecting the USB Digital Camera to a securityProbe-5ESV or a AKCess Pro Door Control Unit.

The connection type and port number is Universal. Four USB 2.0 ports on the rear of each unit are assigned to USB Digital Camera connectivity.

Sensor Graphing

The securityProbe 5ESV integrates and displays graphs of all sensor data in its web-based user interface. The individual graph (day, week, month and year) for each sensor type can be customized, simply by modifying the script template used to generate a particular graph.

RRD tool is used to build an embedded database of sensor data. This data can be accessed from the web interface, or downloaded to a remote PC. MRTG can be used to generate real-time graphs of sensor data on a remote website.

Notifications

Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5ESV. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use web based interface allows you to setup the securityProbe 5ESV within minutes. When online, the sensors use their 4 levels of threshold checking and report any status change.

 

Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via email, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network monitoring system using SNMP traps.

 

The securityProbe 5ESV can automatically switch a relay on or off, wake-up or shutdown a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions. The securityProbe 5ESV can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.

 

Monitor key devices and services with virtual sensors

The virtual sensors securityProbe-5ESV help you integrate other located on the corporate network devices into the 24/7 security monitoring. Here the securityProbe-5ESV can also serve as an SNMP Trap Receiver.

Also Modbus installations can monitor the securityProbe5ESV reporting system via TCP / IP network. Disorders of Modbus-enabled devices are managed directly from the securityProbe-5ESV immediately to the appropriate technician.

Data storage as evidence as part of the IT risk assessment

The physical security monitoring of key areas is almost a must. Didactum, longtime provider of proven IT monitoring systems for surveillance, has here provided a technical article for you.

Even insurance companies and banks illuminate under so-called audits / IT risk assessment increasingly the provision of its customers within the IT resiliency. Not every company has a mirrored, disaster tolerant IT infrastructure, so that a failure of IT for small and medium enterprises in the worst case assume threatening forms. A complete failure of the IT infrastructure, as a result of fire, flood / water pipe break, etc., in the worst case lead to the economic from the company concerned.
 
With the sustainable securityProbe-5ESV IT Monitoring Appliance allows you to monitor your mission-critical areas and equipment around the clock. The IP-based from the securityProbe meter stored measurement data from the sensors are stored in the internal database and can be exported to request of applications such as MS Excel or Cacti. Ideal as proof of the continuous monitoring of important physical environmental factors.
 
However, you can already securityProbe-5ESV meter covered by the connected IP sensors measuring data graphically evaluate and thus gain an accurate view of your infrastructure. Quickly determine how the critical environmental factor temperature or humidity developed with a few clicks in your sensitive areas and equipment.
 
Structural defects or under- or over-sized air conditioning systems can, for example, are quickly identified through analysis of temperature trends and countermeasures taken in good time. In the context of energy saving of IT, neudeutsch also called Green IT, you can reduce energy consumption in your server room / data center, where you can monitor the cooling capacity of the installed air conditioning systems and then optimize based on the data material gained during the security test instrument.
 
Here also the offered Didactum IP Power Monitor Sensor, which allows you to measure and monitor both the power supply and the power consumption in your main rooms recommends.

Firmware

Under the AKCP Lifetime Support the firmware of the sensorProbe / securityProbe will be updated regularly. The team of Didactum® regularly informed about AKCP microcode updates.

For instructions on how to update the AKCP sensorProbe / securityProbe firmware can be found in our Frequently Asked Questions for AKCP products.

AKCP securityProbe 5ESV

 

Compatible with all of the AKCess Pro range of Intelligent Sensors it provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors.

 

from 1295,00 Euro*

 

ALTERNATIV

 

 

Didactum Monitoring System 500 II With Didactum`s Monitoring System 500 II you get a proven Monitoring solution to protect your mission-critical facilities and sites. This device is applicable across sectors and suitable for Monitoring of sensitive IT infrastructure (server room / data center), as well as for production areas and technical rooms.

 

The Didactum monitoring system 500 II is a stand-alone monitoring device. Thanks to its full SNMP support, this monitoring system can be used with SNMP tools and Network Management Systems (NMS) such as Nagios or OpenNMS and many more. This IT monitoring device has a built-in Web server for easy configuration. It supports standard network protocols such as CAN, DHCP, HTTP, HTTPS, SNMP, SMTP, FTP, and Syslog. State changes, operating problems and critical events are reported immediately by e-mail, FTP, Syslog or SNMP. If you order the optional Quad band GSM modem (item No. 14025), this high-end monitoring system can also send critical events and alarms via SMS directly to your mobile phone. This is recommended for example in case of malfunction or failure of your network connections. Including Sensor Temperature!

 

 

 

 

from 498,00 Euro*

Features

  • Embedded web server displays sensor information and live video from connected cameras.
  • Control PTDZ cameras directly from the web interface.
  • Record digital video to remote servers or internal memory, or send live images to your own website.
  • Connect up to 4 USB Digital Cameras, and simultaneously display images up to 640x480 resolution.
  • Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many more.
  • Integrates with network management systems via SNMPv1 and Encrypted SNMPv3.
  • Stream video and sensor information directly to your cellphone or PDA.
  • Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters.
  • Uses Linux operating system for maximum stability and flexibility.
  • Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment.
  • Built-in graphing and data logging, internally or to a remote PC. Platform independent; free firmware upgrades and utilities from AKCess Pro.
  • Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 )
  • Compatible with complete range of AKCess Pro Intelligent Sensors
  • Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP