securityProbe 5ES
Compatible with all of the AKCess Pro range of Intelligent Sensors it provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors.
The securityProbe 5E Standard has a Linux Operating System running an iMX25 CPU.
An additional 2 Gigabytes SD card is installed to provide greater storage capacity.
The only monitoring system you'll ever need...
The securityProbe 5E Standard also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway.
The web-based interface is written in PHP allowing end-user changes such as language translation. The securityProbe 5E Standard has a battery backed time of day clock for accurate record keeping.
It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios.
The securityProbe 5E Standard has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing. Complete SNMP functions such including SNMP v3 encryption are supported.
securityProbe 5E Standard's OnBoard Architecture
Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E Standard. When plugged in, sensors automatically configure themselves and go 'online'. Using the either the E-sensor8, or the E-opto16 expansion modules, up to 600 sensors can be connected to a single unit. Our easy-to-use port numbering system allows you to setup the securityProbe 5E Standard within minutes.
- iMX25 CPU
- 128 MB of SDRAM
- 128 MB NAND Flash
- 10/100 Mbps Ethernet Port
- 1x USB 1.1 Port
- RS485 Ports
- Internal Audio Speaker
- Internal Microphone
- 8 Full AutoSense RJ-45 Ports (Maximum of 500 Sensors)
- 4x RJ-45 Expansion Ports
IP based monitoring of dry contacts with e-opto16 / e-sensor8
IP based monitoring of dry contacts with e-opto16 expansion module If you have plants and equipment in use, which are equipped with dry contacts, you could attach the E-opto16 Expansion Module (E-opto16). Here you can connect up to 16 dry contacts for network-enabled remote monitoring with securityProbe-5E Standard, including extensive alarm types.
The securityProbe-5E-E Standard E-opto16 expansion module can also be extended up to 300 meters. The securityProbe 5ES can be expanded by optional available expansion modules. Increase the number environmental sensors or the number of dry contacts. Additional sensors could be connected to the E-sensor8 expansion module. The E-Sensor8 module can be extended via CAT-5 cable up to 300 meters - ideal for monitoring large areas and infrastructures.
Dry contacts of importants systems are integrated with the optional E-opto16 expansion module into the securityProbe 5E network monitoring. You will be informed in case of breakdown of critical systems (UPS systems etc.).
8 ports for SNMP-enabled Environmental Sensors
In the basic version, the securityProbe-5ES provides 8 ports for SNMP-enabled AKCP sensors such as sensor temperature, sensor temperature and humidity, water sensor, smoke detections sensor, motion detection sensors and many other more. Dry contacts / alarm switches can be remotely monitored over your network by the use the new IO-Digital8 Adapter (AC-IODC8).
Thanks to AKCP`s AutoSense feature, the sensor will be automatically identified - you only have to enter the required warning states and alarm species in securityProbe`s 5E intuitive web interface. One Dual Temperature & Humidity Sensor is included, so you start your surveillance immediately.
Via Cat5 cable, you can extend this sensor, even up to 300 meters. So you are flexible with the sensor installation.
Didactum® recommends for 7x24 monitoring of data centers the temperature measurement chain sensors from AKCP. Up to 8 SNMP-enabled temperature sensors could be connected in series by just a use of 1 port of the securityProbe-5ES remote-security server. This results in the maximum number of 64 SNMP-enabled sensors on a single securityProbe5E base unit - ideal for temperature control of many server racks. The length of each chain can be up to 150 meters.
Notifications & False Message Filter
Notifications
Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E Standard. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use web based interface allows you to setup the securityProbe 5E Standard within minutes.
When online, the sensors use their 4 levels of threshold checking and report any status change. Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via email, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network monitoring system using SNMP traps.
The securityProbe 5E Standard can automatically switch a relay on or off, wake-up or shutdown a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions. The securityProbe 5E Standard can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.
False Message Filter
In order to prevent false alarms, the securityProbe 5E Standard allows extensive filtering of events. You can limit events based on the time of day or the day of the week. You can also limit the number of alerts per hour, so that you are not swamped with many messages. This is especially important with the sensor like the motion detector where you may want to process an event only when the business premises are closed.
AKCP securityProbe 5ES
Compatible with all of the AKCess Pro range of Intelligent Sensors it provides a complete environmental, access control and security monitoring solution. The AKCP securityProbe 5E Standard has a Linux Operating System running an iMX25 CPU.
from 995,00 Euro*
ALTERNATIV
Didactum Monitoring System 500 II With Didactum`s Monitoring System 500 II you get a proven Monitoring solution to protect your mission-critical facilities and sites. This device is applicable across sectors and suitable for Monitoring of sensitive IT infrastructure (server room / data center), as well as for production areas and technical rooms.
The Didactum monitoring system 500 II is a stand-alone monitoring device. Thanks to its full SNMP support, this monitoring system can be used with SNMP tools and Network Management Systems (NMS) such as Nagios or OpenNMS and many more. This IT monitoring device has a built-in Web server for easy configuration. It supports standard network protocols such as CAN, DHCP, HTTP, HTTPS, SNMP, SMTP, FTP, and Syslog. State changes, operating problems and critical events are reported immediately by e-mail, FTP, Syslog or SNMP. If you order the optional Quad band GSM modem (item No. 14025), this high-end monitoring system can also send critical events and alarms via SMS directly to your mobile phone. This is recommended for example in case of malfunction or failure of your network connections. Including Sensor Temperature!
from 498,00 Euro*
Features
Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many more. Integrates with network management systems via SNMPv1 and Encrypted SNMPv3. Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters.
Uses Linux operating system for maximum stability and flexibility. Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment. Built-in graphing and data logging, internally or to a remote PC. Platform independent; free firmware upgrades and utilities from AKCess Pro.
Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 ).
Compatible with complete range of AKCess Pro Intelligent Sensors Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP Enable Access Control of 2 Doors using a single Door Control Unit. (Up to 8 Doors are Supported on a single securityProbe 5E Standard)