securityProbe 5E-X60 Monitoring Appliance

Monitor the physical environment and receive alerts of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and more.

securityProbe 5E-X60

Compatible with the AKCP range of Intelligent Sensors, the SEC5E-X60 provides a complete environmental, access control and security solution for up to 500 connected sensors.

The securityProbe 5E-X60 has x60 2 Wire Dry Contacts. A 2 Gigabyte SD card can be installed to provide greater storage capacity.

The SEC5E-X60 boasts High Speed USB 2.0 connectivity with ports available to connect 1x EDGE-180M USB Modem.

Networked Monitoring

It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios. The securityProbe 5E-X60 has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing.

 

Complete SNMP functions such including SNMP v3 encryption are supported. The securityProbe 5E-X60 also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway. The web-based interface is written in PHP allowing end-user changes such as language translation. The securityProbe 5E-X60 has a battery backed time of day clock for accurate record keeping.

 

Analyzing the sensor measurement data

The SNMP based securityProbe 5E measuring system stores all the measured values of the connected sensors. The integrated syslog displays events including time and date stamp.

The stored sensor data can even be presented graphically directly in the web interface of securityProbe5E X60 measuring system in the form of diagrams.

State changes connected monitoring sensors or relay contacts can be reported on a variety of ways from the securityProbe 5ESV X60 alarm system.

Get reliably reported interference and threats

In addition to the TCP / IP-based measurement of the new sensors securityProbe5E X60 offers a variety of Benachrichtigung- and alarms.

With impending malfunctions or catastrophic events, can this surveillance system reliable alarm, SMS alarm, MMS, FAX, script, SNMP Trap or phone alert timely emergency email you and your colleagues.

Temperature

Sensor Graphing

The securityProbe 5E-X60 integrates and displays graphs of all sensor data in its web-based user interface. The individual graph (day, week, month and year) for each sensor type can be customized, simply by modifying the script template used to generate a particular graph.

 

RRD tool is used to build an embedded database of sensor data. This data can be accessed from the web interface, or downloaded to a remote PC. MRTG can be used to generate real-time graphs of sensor data on a remote website.

 

Notifications

Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E-X60. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use web based interface allows you to setup the securityProbe 5E-X20 within minutes. When online, the sensors use their 4 levels of threshold checking and report any status change.

 

Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via email, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network monitoring system using SNMP traps.

 

The securityProbe 5E-X60 can automatically switch a relay on or off, wake-up or shutdown a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions. The securityProbe 5E-X60 can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.

 

securityProbe-5E-X60

AKCP securityProbe 5E-X60

 

The securityProbe 5E-X60 Monitoring Device is compatible with all Intelligent Sensors from AKCP / AKCess Pro and provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors.

 

from 1895,00 Euro*

 

Features

  • Embedded web server displays sensor information and live video from connected cameras.
  • Control PTDZ cameras directly from the web interface.
  • Record digital video to remote servers or internal memory, or send live images to your own website.
  • Connect Digital Cameras, and simultaneously display images up to 640x480 resolution.
  • Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many more.
  • Integrates with network management systems via SNMPv1 and Encrypted SNMPv3.
  • Stream video and sensor information directly to your cellphone or PDA.
  • Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters.
  • Uses Linux operating system for maximum stability and flexibility.
  • Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment.
  • Built-in graphing and data logging, internally or to a remote PC. Platform independent; free firmware upgrades and utilities from AKCess Pro.
  • Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 )
  • Compatible with complete range of AKCess Pro Intelligent Sensors
  • Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP