securityProbe 5E-X20 Monitoring Appliance

Monitor the physical environment and receive alerts of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and more.

AKCP securityProbe 5E-X20

Compatible with the AKCP range of Intelligent Sensors, the SEC5E provides a complete environmental, access control and security solution for up to 500 connected sensors.

The securityProbe 5E has a Linux Operating System running an iMX25 CPU. An additional 2 Gigabytes SD card can be installed to provide greater storage capacity.

The SEC5E boasts High Speed USB 2.0 connectivity with ports available to connect 1x EDGE-180M USB Modem.

AKCP securityProbe 5E-X20 IT Monitoring System

Didactum stops in front of a large range of IP-enabled sensors for environmental, safety and power monitoring. Additionally, the offered Didactum securityProbe5E-X20 2 ports for sensor expansion units.

This TCP / IP-based measurement and alarm signaling device can monitor up to 500 different IP so capable sensors. In addition, this monitoring system provides 20 inputs for connection of floating contacts. Monitor so the signal / alarm contacts your UPS systems, air conditioners, emergency power systems etc. via TCP / IP network or Internet.

Modbus-enabled devices and systems can also be integrated into the desired network monitoring the securityProbe 5E-X20. In the German Web interface you can easily configure securityProbe 5E-X20.

The integrated Linux-based operating system provides you with additional features such as Apache Web Server, and support for scripting languages ​​like Perl, Bash or PHP. By connecting a GSM modem, the securityProbe-5E-X20 can send on request also send alarms directly by SMS message or phone call.

Connect up to 4 External Digital Cameras

The securityProbe 5E-X20 can display pictures from a maximum of four Digital Cameras simultaneously in several sizes, up to 640x480 pixels resolution. AKCess Pro cameras are used in professional surveillance and CCTV monitoring systems. A built-in pan-tilt controller interface allows complete control of pan and tilt cameras using the industry standard Pelco D bus.


Sensor Graphing

The securityProbe 5E-X20 integrates and displays graphs of all sensor data in its web-based user interface. The individual graph (day, week, month and year) for each sensor type can be customized, simply by modifying the script template used to generate a particular graph. RRD tool is used to build an embedded database of sensor data. This data can be accessed from the web interface, or downloaded to a remote PC. MRTG can be used to generate real-time graphs of sensor data on a remote website.



Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E-X20. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use web based interface allows you to setup the securityProbe 5E-X20 within minutes. When online, the sensors use their 4 levels of threshold checking and report any status change.


Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via email, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network monitoring system using SNMP traps.


The securityProbe 5E-X20 can automatically switch a relay on or off, wake-up or shutdown a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions. The securityProbe 5E-X20 can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.


securityProbe 5E-X20's OnBoard Architecture

Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E-X20. When plugged in, sensors automatically configure themselves and go 'online'. Using the either the E-sensor8, or the E-opto16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use port numbering system allows you to setup the securityProbe 5E-X20 within minutes.


  • AKCP iMX25 CPU
  • 128 MB OnBoard NAND Flash
  • 10/100 Mbps Ethernet Port
  • 1x USB 2.0 Modem Port
  • 4x BNC Video Ports
  • RS485 Ports
  • 20x Dry Contact Inputs
  • Internal Microphone
  • 8 Full AutoSense RJ-45 Ports (Maximum of 500 Sensors)
  • RJ-45 Expansion Ports

AKCP securityProbe 5E-X20


The securityProbe 5E-X20 Monitoring Device is compatible with all AKCP´s Intelligent Sensors and provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors. supported.


from 1595,00 Euro*



  • Embedded web server displays sensor information and live video from connected cameras.
  • Control PTDZ cameras directly from the web interface.
  • Record digital video to remote servers or internal memory, or send live images to your own website.
  • Connect Digital Cameras, and simultaneously display images up to 640x480 resolution.
  • Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many more.
  • Integrates with network management systems via SNMPv1 and Encrypted SNMPv3.
  • Stream video and sensor information directly to your cellphone or PDA.
  • Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters.
  • Uses Linux operating system for maximum stability and flexibility.
  • Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment.
  • Built-in graphing and data logging, internally or to a remote PC. Platform independent; free firmware upgrades and utilities from AKCess Pro.
  • Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 )
  • Compatible with complete range of AKCess Pro Intelligent Sensors
  • Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP

Request offer

Are you curious to Didactum offered securityProbe 5E-X20 monitoring solution?

Then challenge today our AKCP sales team on a free, no obligation offer for you. We are happy to assist you in planning and implementing your surveillance solution.

If desired, our engineers and consultants to take over the on-site installation of the monitoring hardware, including integration into your existing management system. We look forward to you!