Every administrator has probably already experienced: loss of important server / IT components due to overheating in server racks.

Do not allow to reach this state. Rely on the network-based sensorProbe and securityProbe early warning systems.

Just mout Didactum`s top-seller sensorProbe2 (SP2) with SNMP-enabled temperature sensor in your server rack.

Thanks to its compact dimensions, you can add the sensorProbe2 in each server rack. Already you can safely pursue your daily business as the
sensorProbe2 alerts the security personnel immediately when the temperature in server cabinet exceeded. Get notified by eMail, SMS (via email to SMS
gateway) or via SNMP traps. sensorProbe2 is the ideal solution for 7/24 rack-monitoring / server cabinet monitoring.

The completed assembly and installation of sensorProbe (SP2) is easy and completed within a few minutes. With sensorProbe2, you can display the temperature gradient in the server rack of the last hours, days or even months and thus determine whether the cooling of your server rack is sufficient or not. This is particularly important if you add new server systems into your existing racks. Modern blade servers are due to their compact design very sensitive to hot spots in racks.
Protect your critical servers and computer components from overheating.

On the second sensor port of sensorProbe2, you can connect another SNMP-enabled environmental sensor such as the recommended water detector or the smoke detector.

If a have an network management system / NMS in action, e.g. HP OpenView, WhatsUp Gold or NAGIOS, you can integrate sensorProbe2 including SNMP-enabled sensors into the network monitoring solution. The needed MIB files and SNMP utilities are included with sensorProbe2 (SP2). You could order sensorProbe2 in the online store at http://customer.didactum-online.de

Integrate plans or drawings of your server cabinets into the mapping module of securityProbe remote-security appliances. Just upload your drawing into securityProbe´s memory and add installed sensors with "drag and drop", so that in case of alarm as e.g. overheating in cabinet, the corresponding alarm is also displayed visually with the securityProbe. Ideal for security / control rooms, whive have to remotely monitor a variety of offices.
The on-site technician can be conducted selectively to the source of error.
your critical IT systems.

Immediate alerting when required temperature and relative humidity changes in the server room, production area and storage.