Home | Contact form | Sitemap | Imprint

Webinterface SP2

Web interface of the sensorProbe2. In the field you will see the attached Summary intelligent sensors. In this case, temperature & humidity combination sensor and water detectors. In addition, you can see at a glance the current status of the sensors. Should events / state changes have occurred, as news of events in the lower area in Syslog with the date and time are listed.
Figure: Web interface of the sensorProbe2. In the field you will see the attached Summary intelligent sensors. In this case, temperature & humidity combination sensor and water detectors. In addition, you can see at a glance the current status of the sensors. Should events / state changes have occurred, as news of events in the lower area in Syslog with the date and time are listed.
Configuration of sensors attached to the sensor in the Web menu sample 2 With the help of auto-identification function of the intelligent sensors have already been identified immediately and the web interface the sensor sample displayed. The sensors attached to the sensorProbe2 you can name individually under Description. Then enter the desired temperature-a threshold: Critical High, Warning High, Warning Low, Critical Low.
Figure: Configuration of sensors attached to the sensor in the Web menu sample 2 With the help of auto-identification function of the intelligent sensors have already been identified immediately and the web interface the sensor sample displayed. The sensors attached to the sensorProbe2 you can name individually under Description. Then enter the desired temperature-a threshold: Critical High, Warning High, Warning Low, Critical Low.
Here you see the menu settings, the sensor sensorkontrolliertes relay. Here you determine how the connected relays to be controlled: Manually turn on or off the relay, but also cyclical relay control relay control in interaction with sensors, for example, can the sensorProbe2 (AK-SP2) when the temperature exceeded / server room overheating of the relay mounted fan to switch on until the optimum temperature was reached again. Simultaneously, upon request, an SNMP alarm to the building, an email alert or SMS (via gateway) to the appropriate people.
Figure: Here you see the menu settings, the sensor sensorkontrolliertes relay. Here you determine how the connected relays to be controlled: Manually turn on or off the relay, but also cyclical relay control relay control in interaction with sensors, for example, can the sensorProbe2 (AK-SP2) when the temperature exceeded / server room overheating of the relay mounted fan to switch on until the optimum temperature was reached again. Simultaneously, upon request, an SNMP alarm to the building, an email alert or SMS (via gateway) to the appropriate people.
Figure: When the alarm will be notified of data center, server room, production, warehouse, etc., can archive up to 6 e-mail recipient.
Figure: When the alarm will be notified of data center, server room, production, warehouse, etc., can archive up to 6 e-mail recipient.