Home | Contact form | Sitemap | Imprint

IODCRJ8 Quick Overview - Expansion Unit for SEC-5E

IODCRJ8 Quick Overview - Expansion Unit for SEC-5E
Features at a glance

* Measurement range - Alarm or Normal
* Communications cable - RJ45 jack to sensor using UTP Cat 5 wire, Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP.
* Sensor type - open/closed or cycles contact switches
* Input voltage range. 0 to 5 volts on each of the 8 dry contacts
* Normal input voltage is settable under software on each of the 8 dry contacts
* Normally open, normally closed is settable under software on each of the 8 dry contacts
* Current Range. Can sink up to 20 mAmps on each of the 8 dry contacts
* Measurement rate - multiple readings every second
* Only compatible on AKCP securityProbe line of units.
* Power source: powered by the securityProbe 5E. No additional power needed.
* securityProbe 5E autodetects the presence of each dry contact on the IO-digital8
* Connect up to 8 IO-digital8 sensors per each securityProbe 5E main unit and E-sensor8 expansion
* modules for a total of 64 dry contacts per box.
* Full autosense including disconnect alarm

Order number: AK-IODCRJ8