Home | Contact form | Sitemap | Imprint

Oure store

Visit our online shop for monitoring and security technology. The online shop you will find all the items listed here fast and easy. Find your selected product..

AKCP products

The SNMP-enabled monitoring products of our partner AKCP almost anywhere. Whether data center, server room, production...

Support

Didactum® offer technical support for AKCP IT monitoring products. Trials / test pattern of AKCP products for investors contracting are possible in Didactum®.

AKCess Pro securityProbe-5E Standard

AKCess Pro sensorProbe8-X60DCW
SKU: 11052
Manufacturer: AKCess Pro
Please call me back!
Please give me a Quotation
Contact

The only monitoring system you'll ever need...

Monitor the physical environment and receive alerts of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and more.

Compatible with all of the AKCess Pro range of Intelligent Sensors it provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors.

The securityProbe 5E Standard has a Linux Operating System running an iMX25 CPU. An additional 2 Gigabytes SD card is installed to provide greater storage capacity.

The securityProbe 5E Standard also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway.

The web-based interface is written in PHP allowing end-user changes such as language translation. The securityProbe 5E Standard has a battery backed time of day clock for accurate record keeping.
Networked Monitoring

It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios.

The securityProbe 5E Standard has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing. Complete SNMP functions such including SNMP v3 encryption are supported.

securityProbe 5E Standard's OnBoard Architecture

Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E Standard. When plugged in, sensors automatically configure themselves and go 'online'. Using the either the E-sensor8, or the E-opto16 expansion modules, up to 600 sensors can be connected to a single unit. Our easy-to-use port numbering system allows you to setup the securityProbe 5E Standard within minutes.
iMX25 CPU
128 MB of SDRAM
128 MB NAND Flash
10/100 Mbps Ethernet Port
1x USB 1.1 Port
RS485 Ports
Internal Audio Speaker
Internal Microphone
8 Full AutoSense RJ-45 Ports (Maximum of 500 Sensors)
4x RJ-45 Expansion Ports

Nagios network monitoring

The powerful Open-Source Nagios Network monitoring system is preinstalled on the securityProbe-5ES and can be activated on with a simple mouse click. The purchase of additional hardware for Nagios NMS can therefore be omitted.
Sehen Sie hier die Tactical Monitoring Uebersicht des im securityProbe-5E integrierten Nagios Monitoring Systems Look here at the Tactical Monitoring Overview of the built-in Nagios Monitoring System: The free Nagios Monitoring System is included in securityProbe5ES alarm server. In the menu Tactical Monitoring Overview page you get a quick overview of the overall status of your network. If there are problems within the network hosts and services, this will be shown by Nagios.

8 ports for SNMP-enabled Environmental Sensors

In the basic version, the securityProbe-5ES provides 8 ports for SNMP-enabled AKCP sensors such as sensor temperature, sensor temperature and humidity, water sensor, smoke detections sensor, motion detection sensors and many other more. Dry contacts / alarm switches can be remotely monitored over your network by the use the new IO-Digital8 Adapter (AC-IODC8).

Thanks to AKCP`s AutoSense feature, the sensor will be automatically identified - you only have to enter the required warning states and alarm species in securityProbe`s 5E intuitive web interface. One Dual Temperature & Humidity Sensor is included, so you start your surveillance immediately.

Via Cat5 cable, you can extend this sensor, even up to 300 meters. So you are flexible with the sensor installation.
Didactum® recommends for 7x24 monitoring of data centers the temperature measurement chain sensors from AKCP. Didactum® recommends for 7x24 monitoring of data centers the temperature measurement chain sensors from AKCP. Up to 8 SNMP-enabled temperature sensors could be connected in series by just a use of 1 port of the securityProbe-5ES remote-security server. This results in the maximum number of 64 SNMP-enabled sensors on a single securityProbe5E base unit - ideal for temperature control of many server racks. The length of each chain can be up to 150 meters. Additional sensors for rack monitoring, you can see here.
See here a selection of available monitoring sensors for the securityProbe 5E: Select surveillance cameras or sensors for security monitoring of critical infrastructures such as server room, telecommunications, research, production and logistics.   See here a selection of available monitoring sensors for the securityProbe 5E: Select surveillance cameras or sensors for security monitoring of critical infrastructures such as server room, telecommunications, research, production and logistics.

Using the E-sensor8 expansion module

On it`s front panel, the new securityProbe-5ES has 4 ports for optional expansion modules. So you can increase with the new e-sensor8 expansion module (E-sensor8) the number of attached remote-monitoring sensors.

The extension module could be disposed with CAT5 cable up to 300 meters, so that further server rooms could be integrated in the around-the-clock security surveillance of the securityProbe 5ES.

Each individual e-Sensor8 expansion module can be chained together, so that even large-scale infrastructures are protected against physical threats (heat, fire, water).
Durch Anschluss von E-sensor8 sowie von E-opto16 securityProbe-Modulen kann Ihre netzwerkbasierende Fernueberwachungsloesung flexibel erweitert werden. AKCP`s new securityProbe5ES alarm server can be extended flexibly, so that your IP based security monitoring will fit possible future requirements.

IP based monitoring of dry contacts with e-opto16

IP based monitoring of dry contacts with e-opto16 expansion module If you have plants and equipment in use, which are equipped with dry contacts, you could attach the E-opto16 Expansion Module (E-opto16). Here you can connect up to 16 dry contacts for network-enabled remote monitoring with securityProbe-5E Standard, including extensive alarm types.

The securityProbe-5E-E Standard E-opto16 expansion module can also be extended up to 300 meters.
The securityProbe 5E can be expanded by optional available expansion modules. Increase the number environmental sensors or the number of dry contacts. The securityProbe 5ES can be expanded by optional available expansion modules. Increase the number environmental sensors or the number of dry contacts.
Additional sensors could be connected to the E-sensor8 expansion module. The E-Sensor8 module can be extended via CAT-5 cable up to 300 meters - ideal for monitoring large areas and infrastructures.   Additional sensors could be connected to the E-sensor8 expansion module. The E-Sensor8 module can be extended via CAT-5 cable up to 300 meters - ideal for monitoring large areas and infrastructures.
Dry contacts of importants systems are integrated with the optional E-opto16 expansion module into the securityProbe 5E network monitoring. You will be informed in case of breakdown of critical systems (UPS systems etc.).   Dry contacts of importants systems are integrated with the optional E-opto16 expansion module into the securityProbe 5ES network monitoring. You will be informed in case of breakdown of critical systems (UPS systems etc.).

Sensor Graphing

The securityProbe 5E Standard integrates and displays graphs of all sensor data in its web-based user interface. The individual graph (day, week, month and year) for each sensor type can be customized, simply by modifying the script template used to generate a particular graph.

RRD tool is used to build an embedded database of sensor data. This data can be accessed from the web interface, or downloaded to a remote PC. MRTG can be used to generate real-time graphs of sensor data on a remote website.

Notifications & False Message Filter

Notifications

Up to 8 of AKCess Pro's Intelligent Sensors can be connected to the securityProbe 5E Standard. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use web based interface allows you to setup the securityProbe 5E Standard within minutes.

When online, the sensors use their 4 levels of threshold checking and report any status change. Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via email, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network monitoring system using SNMP traps.

The securityProbe 5E Standard can automatically switch a relay on or off, wake-up or shutdown a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions. The securityProbe 5E Standard can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.

False Message Filter

In order to prevent false alarms, the securityProbe 5E Standard allows extensive filtering of events. You can limit events based on the time of day or the day of the week. You can also limit the number of alerts per hour, so that you are not swamped with many messages. This is especially important with the sensor like the motion detector where you may want to process an event only when the business premises are closed.

Features

Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many more. Integrates with network management systems via SNMPv1 and Encrypted SNMPv3. Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters.

Uses Linux operating system for maximum stability and flexibility. Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment. Built-in graphing and data logging, internally or to a remote PC. Platform independent; free firmware upgrades and utilities from AKCess Pro.

Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 ).

Compatible with complete range of AKCess Pro Intelligent Sensors Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP Enable Access Control of 2 Doors using a single Door Control Unit. (Up to 8 Doors are Supported on a single securityProbe 5E Standard)

Automatic shutdown of server systems for security threats

The securityProbe-5ES supports you in your operational disaster plans. When entering UPS power, the securityProbe-5ES could initiate a shutdown of existing Linux servers. Windows server systems are also supported.

Mapping Module for display of alarms

The integrated alarm map of securityProbe5ES allows the integration of building plans / blueprints in the 24x7 security monitoring. The exact location of the installed sensors can be integrated into the building plan.

Using the alarm map to determine the origin of the alarm message.

Practical Example: An installed smoke detector triggered an alarm. A simple tap inside the alarm map will show you the location of the smoke detector.

Integration of securityProbe-5ES in Network Management Systems

The securityProbe-5ES is SNMP v1, SNMPv2c, and SNMP v3 compatible.

So the securityProbe Alarm Server could be integrated in network management solutions such as HP Openview, CA Unicenter TNG, IBM Tivoli, WhatsUp Gold, Nagios, OpenNMS. SNMP MIB files and utilities for NMS integration are included.

If desired, Didactum® technicians will install securityProbe-5ES on-site at your company.

Compatible sensors securityProbe-5ES

Representation of the corresponding sensors for the alarm Server AK-SEC-5ES
AKCP Security Sensor AKCP Temperature Sensor AKCP Temperature Sensor - Waterproof Version AKCP Single Port Temperature/Humidity Sensor AKCP Single Port Temperature/Humidity Sensor - Waterproof Version Sensor AKCP`s water detector / water sensor is an advanced microprocessor based design capable of detecting distilled water. This water detector is designed and manufactured by AKCP.
 
AK-TMPxx
  
AK-TMPWxx
      
AK-WSxx
The ropeWater Sensor features a customizable length rope that detects any water contact along its entire length.   The AKCP Airflow sensor is placed in the path of the air stream, where you can measure the status and the amount of the flowing air.   The AKCP passive infrared motion detector is designed to detect presence of movement and it is compatible with the sensorProbe2, sensorProbe8 and securityProbe monitoring devices.   The Dry Contact sensor from AKCP is a simple connection to burglar alarms, fire alarms or any application that requires monitoring by the sensorProbe or securityProbe remote monitoring appliances.   The AKCP AC voltage detector indicates the presence or absence of line voltage.   The AKCP Digital Voltmeter gives the user the full range of functionality including SNMP integration, email and SNMP traps upon settable limits and user defined thresholds.
AK-RWSxx
  
AK-AFS00
    
AK-DCSxx
  
AK-ACV00
  
AK-DCV00
The ACKP Sensor Controlled Relay enables the user remote actuation of electrical devices over the web.   The AKCP 4-20 mAmp signal converter is used for integration of the AKCP sensorProbe2, AKCP sensorProbe8 and AKCP securityProbe remote security devices with a 4-20 mAmp transmitter.   The combined AKCP strobe light and siren can add eye-catching audio visual alarms to the sensorProbe2/8 or securityProbe.   The AKCP sensorProbe2, sensorProbe8 and securityProbe monitoring devices could be integrated with the Smoke detector.   AKCP`s thermocouple sensor is especially designed for measuring temperatures in dangerous or harsh environments in heavy industries such as petrochemical and metal processing. Other uses for this AKCP Thermocouple sensor apart from manufacturing and industrial purposes including cryogenics, superconductor research & development and of course scientific research.   Remote power monitoring capabilities eliminate the need for manual power audits as well as provide alerts to potential power problems. AKCP`s latest 1- or 3-phase four wire Power Monitor Sensor (PMS220V / PMS110V) is designed to be used with the ip-enabled AKCP securityProbe remote monitoring appliances.
         
The 8 Port Sensor Relay from AKCP is a multiport relay for advanced process control. This 8 Port Sensor Relay could be easily controlled by the wide range of AKCP's intelligent sensors. The 8-Port Sensor Relay could provide automatic responses to sensor status changes. It can be controlled via the integrated web interface of the AKCP securityProbe.   /en/products/akcp-monitoring/akcp-sensors/pan-tilt-zoom-ptz-camera-interface.html   Many systems are equipped with dry contacts. Dry contacts are used to signal interference or outages. Connect the dry contacts of UPS systems, air conditioning, fire alarm systems, door locking systems as well as telecommunication equipment and much more the E-opto16 expansion module for securityProbe-5E security appliance to receive a network-based surveillance of dry contacts and switches.   In the basic version, the new securityProbe5E provides eight RJ45 ports for AKCP environmental sensors. Especially customers with large data centers / facilities will need a significantly higher number of sensors for IT security monitoring. Here you can attach the E-sensor8 expansion unit, which is simply attach to the the expansion ports on the securityProbe-5E via CAT-5 cable. If the 4 free expansion slots have already been assigned, the individual expansion units can be chained with each other.   The unit has a single RJ45 connector at one end but the 8 x 2 pin dry contact connectors are replaced by two RJ45 connectors, each compatible with 4 dry contacts.   The IO-Digital8 Adapter (IODC8) is connected to one of the RJ-45 sensor ports of the securityProbe-5E and displayed in the web interface.
      AK-E-IS8