The combined AKCP strobe light and siren can add eye-catching audio visual alarms to the sensorProbe2/8 or securityProbe. When triggered, the siren will generate a loud alarm sound and the strobe light will flash brightly, giving a clear alert of an alarm condition.
The siren and alarm are both incorporated into one security device - only one RJ-45 jack is needed for each combined siren/alarm. You can connect the siren / strobe light using your own CAT 5 cable up to 305 metres, allowing the sensors to be positioned in hot spots.
When the AKCP combined siren / strobe light is plugged into the RJ-45 port, the AKCP sensorProbe2, sensorProbe8 or securityProbe will auto detect the sensor and it will display the status of the device. For compatitibilty issues of AKCP intelligent sensors visit this page
The AKCP siren & strobe light can be triggered manually, via the web interface of the AKCP monitoring appliance, or it can be configured to turn on at certain times, through the web interface. The device can be triggered by any sensor connected to a sensorProbe or by an alarm condition generated by the AKCP sensorProbe, and can be fully integrated with the sensor notification matrix of the AKCP securityProbe (SEC).
Each device of the AKCP combined siren & strobe light has its own SNMP OID so that the status can be collected over the network and graphed using external application like Network Management Systems.
