With the AKCess Pro / AKCP 4-20 mAmp converter these sensors can now be integrated into the sensorProbe enhancing their value with the addition of graphing, web interface, email interface, thresholds, and limits.

Products

Control temp./hum.

A permanent monitoring of temperature and humidity in the server room is important. Even a short-term overheating may jeopardize the availability of your critical server systems.

Video surveillance

Our securityProbe IP-enabled alarm server combines professional video surveillance with environmental onitoring. Connect up to 4 cameras for monitoring your data center / server room.

UPS monitoring

The availability of UPS systems, including the batteries should be regularly inspected. Existing emergency diesel should also be maintained (including fuel supply).

SKU: 10195

Manufacturer: AKCess Pro

AKCP intelligent sensors

AKCP Sensor 4-20 mAmp Converter

The AKCP 4-20 mAmp signal converter is used for integration of the AKCP sensorProbe2, AKCP sensorProbe8 and AKCP securityProbe remote security devices with a 4-20 mAmp transmitter. The 4-20 mAmp technology is used to transmit analog signals over long distances in enviroments with electrical interference. The process control industry uses this technology to collect the analog values from remote sensors because current signals are much less susceptible to noise than voltage signals. A voltage signal can be converted to current and then broadcast over a long distance before it is converted back to voltage and read by the AKCP sensorProbe or AKCP securityProbe device. For compatitibilty issues of AKCP intelligent sensors visit this page.

Specifications & Features:

- Converts current levels from 4 ? 20 mA to 0.8 ? 4.0 V voltage levels
- Operating Temperature: -40°C to 85°C
- Converts current levels from 4 ? 20 mA to 0.8 ? 4.0 V voltage levels
- Maximum linearity of ± 0.09%, maximum accuracy of ± 0.3%
- 2 LEDs show status of the current loop and the power supply
- Operates from a single +5 V DC Power Supply which powered by the sensorProbe monitoring device.
- Input Current Range: +4 mA to +20 mA
- Output Voltage Range: +0.8 V to +4.0 V
- Linearity: ± 0.09 % Full Scale, Maximum
- Accuracy: ± 0.15% Full Scale (± 0.3% Full Scale, Maximum)
- Input Connector: two terminal, Iin(+) and Iin(-), for current loop
- Output Connector: RJ45 jack to converter using UTP Cat 5 wire
- Dimensions: 65(W) x 62(H) x 15(D) mm Weight: 80 grams
- Compatibel to all sensorprobe and securityprobe remote security devices from AKCP

Compatible AKCP alarm server for this sensor

This sensor you can use with the following IP alarm servers:



AKCP sensorProbe2	AKCP sensorProbe8	AKCP-sensorProbe8-X20/X20DCW



AKCP sensorProbe8-X60/X60DCW	AKCP securityProbe 5E	AKCP securityProbe-X20



AKCP securityProbe-X20DCW	AKCP securityProbe-X60	AKCP securityProbe X60DCW

Get in contact with Didactum®:

Didactum® Ltd. Deutschland
Marsweg 17
48163 Münster
Germany
Fon: +49 - 2501 - 9 71 63 55
Fax: +49 - 2501 - 9 71 63 56
http://www.didactum.com
e-mail: info[at]didactum[dot]com