The AKCess Pro / AKCP Power Monitor Sensor gives vital information and allows you to remotely monitor power eliminating the need for manual power audits as well as providing immediate alerts to potential problems.

Products

Video surveillance

Our securityProbe IP-enabled alarm server combines professional video surveillance with environmental onitoring. Connect up to 4 cameras for monitoring your data center / server room.

Water leakage

Water leakage in the data center or server room is one of the biggest threats.
A leakage / flooding of the IT infrastructure can be caused by many reasons.

UPS monitoring

The availability of UPS systems, including the batteries should be regularly inspected. Existing emergency diesel should also be maintained (including fuel supply).

Control temp./hum.

A permanent monitoring of temperature and humidity in the server room is important. Even a short-term overheating may jeopardize the availability of your critical server systems.

SKU: 10138

Manufacturer: AKCess Pro

AKCP intelligent sensors

AKCP 1- or 3-phase four wire Power Meter Sensor

Remote power monitoring capabilities eliminate the need for manual power audits as well as provide alerts to potential power problems. AKCP`s latest 1- or 3-phase four wire Power Monitor Sensor (PMS220V / PMS110V) is designed to be used with the ip-enabled AKCP securityProbe remote monitoring appliances. The combination of AKCP`s new 1- or 3-phase four wire Power Monitor Sensor and securityProbe creates a fully IP enabled remote power monitoring solution. The Power Monitor Sensor communicates via RS485 port. The administrators can be alerted on the power monitor sensor exceeding a pre-defined threshold with securityProbe`s notification / alerting species like eMail, SMS, MMS or Skype. A fully integration in NMS is supported with SNMP traps. For compatitibilty issues of AKCP intelligent sensors visit this page

The collected power data of AKCP`s 1- or 3-phase four wire Power Monitor Sensor (PMS) could be evaluated using the securityProbe?s built-in extensive graphing tool. You may also export data to external applications.

The new AKCP Power Monitor Sensor is a 1- or 3-phase multifunctional four wire power meter. It`s enclosure could be mounted on 35mm DIN rails. The AKCP Power Monitor Sensor is capable of measuring Total Active Power, Total Reactive Power, Active Power, Reactive Power, Phase Line Voltage, Phase Line Current and also Power Factor. AKCP`s new Power Monitor Sensor supports IEC 62053-21 and IEC 62053-23. It is available in two versions: PMS110V for 110V or PMS220V for 220 voltage.

Applications of AKCP 1- or 3-phase four wire Power Meter Sensor combined with securityProbe remote monitoring appliances:

- Power Metering
- IP-based Remote Power Monitoring

Specifications & Features:

- Built-in LCD display
- Operating temperature -10°C - +50°C
- Supply Voltage: 110V or 220V

Measurements:

- Voltage on 220V: 230 to 400V AC (3~)
- Current on 220V: 0 to 30A
- Voltage on 110V: 84/146 ? 156/270V AC (3~)
- Current on 110V: 0 to 30A
- Active and apparent power measuring (Watt and Watt-Hour)

Resolution:

- Measurement rate: one reading every second.
- Data Communication Port: RS485
- Data transportation speed 1200bps
- Data save: The data can be stored more than 20 years when power cut
- Up to 64 Power Monitor Sensors could be connected to securityProbe
- Power Consumption: 2W / 10VA per phase
- Maximum cable run length with recommended cable is about 800 meters

Compatible AKCP alarm server for this sensor

This sensor you can use with the following IP alarm servers:



AKCP securityProbe 5E	AKCP securityProbe-X20	AKCP securityProbe-X20DCW



AKCP securityProbe-X60	AKCP securityProbe X60DCW

Get in contact with Didactum®:

Didactum® Ltd. Deutschland
Marsweg 17
48163 Münster
Germany
Fon: +49 - 2501 - 9 71 63 55
Fax: +49 - 2501 - 9 71 63 56
http://www.didactum.com
e-mail: info[at]didactum[dot]com