Home | Contact form | Sitemap | Imprint

AKCP intelligent sensors

AKCP Pan-Tilt-Zoom (PTZ) Camera Interface

With the AKCP Pan-Tilt-Zoom Camera Interface you could connect up to 4 cameras with PTZ-function to the securityProbe devices. The PTZ cameras should have a RS485 interface. Once connected, the cameras could be configured via the web interface of the securityProbe. You can view live streaming video, move the cameras, and set up software motion detection rules to generate alarms.

The interface cable connects an RJ45 port on the securityProbe to a RS485 bus; up to four PTZ cameras can then be connected to this bus. When a camera is connected to the RS485 bus, the securityProbe will auto detect the camera, and it will display the output of the device on the web interface.

Specifications & Features:

- Sensor type - PTZ camera and software motion detection
- Measurement type - video signal, software motion detection
- Power source: powered by the securityProbe. No additional power needed
- Communications cable - RJ45 jack to RS485 bus interface using UTP Cat 5 wire
- securityProbe auto detects the presence of cameras
- Measurement rate - up to 15 frames per second per camera.
- Full autosense including disconnect alarm
- sensorProbe8 Linux and cameraProbe are also supported

Compatible AKCP alarm server for this sensor

This sensor you can use with the following IP alarm servers:

The AKCP securityProbe 5E will monitor the physical environment and alert you of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and much more. Up to 4 remote controlled pan-and-tilt cameras, combined with the AKCP securityProbe 5E?s motion detection and event notification system, can keep you up to date via email, SMS, telephone call, web-brower, and other channels - wherever you are, 24/7. The securityProbe-X20 is the next generation dry contact device with an advanced 20 dry contact inputs. It comes in a 1U rackmount box. The securityProbe-X20 has a Linux Operating System with 128 Megabytes of Flash memory and 64 Megabytes of SDRAM. It is TCP/IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, vi, Telnet, PHP, Email and Nagios. The securityProbe-X20DCW with internal supply power (SEC-X20DCW) is the next generation dry contact device with an advanced 20 dry contact inputs. It comes in a 1U rackmount box. The securityProbe-X20DCW (SEC-X20DCW) has a Linux Operating System with 128 Megabytes of Flash memory and 64 Megabytes of SDRAM. It is TCP/IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, vi, Telnet, PHP, Email and Nagios.
 
AKCP securityProbe-X20
  
The securityProbe-X60 is the next generation dry contact device with an advanced 60 dry contact inputs. It comes in a 2U rackmount box. The securityProbe-X60 has a Linux Operating System with 128 Megabytes of Flash memory and 64 Megabytes of SDRAM. It is TCP/IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, vi, Telnet, PHP, Email and Nagios.   The securityProbe-X60DCW (SEC-X60DCW) is the next generation dry contact device with an advanced 60 dry contact inputs. It comes in a 2U rackmount box. The securityProbe-X60DCW (SEC-X60DCW) has a Linux Operating System with 128 Megabytes of Flash memory and 64 Megabytes of SDRAM. INTERNAL POWER SUPPLY!    
   

Get in contact with Didactum®:

Didactum® Ltd. Deutschland
Marsweg 17
48163 Münster
Germany
Fon: +49 - 2501 - 9 71 63 55
Fax: +49 - 2501 - 9 71 63 56
http://www.didactum.com
e-mail: info[at]didactum[dot]com