The AKCess Pro / AKCP Fuel Level Sensor is a float-type liquid level Sensor, used to monitor the fuel level in your storage tank.

Products

Control temp./hum.

A permanent monitoring of temperature and humidity in the server room is important. Even a short-term overheating may jeopardize the availability of your critical server systems.

Drycontacts SP2DC

An important feature of the sensorProbe2DC is the ability to attach up to 5 dry contact inputs per RJ45 sensor port.Here you need the 5 Input dry contact cable.

Rackmonitoring SP8

The security monitoring of server racks and data cabinets is important. A cost-effective solution for around-the-clock surveillance is the sensorProbe8 envirionmental monitoring device by AKCP INC.

Water leakage

Water leakage in the data center or server room is one of the biggest threats.
A leakage / flooding of the IT infrastructure can be caused by many reasons.

Video surveillance

Our securityProbe IP-enabled alarm server combines professional video surveillance with environmental onitoring. Connect up to 4 cameras for monitoring your data center / server room.

UPS monitoring

The availability of UPS systems, including the batteries should be regularly inspected. Existing emergency diesel should also be maintained (including fuel supply).

Reseller

The Didactum® retailers is aimed at retailers, wholesalers, integrators, IT consultants and system houses. Interested? Please contact us phone or e-mail to our Office.

SKU: 10260

Manufacturer: AKCess Pro

AKCP Intelligente Sensoren

AKCP Fuel Level Sensor

The AKCP Fuel Level Sensor is a float-type liquid level Sensor, used to monitor the fuel level in your storage tank.

If your business infrastructure relies on backup generators, the chances are you are also relying on fuel to power those. By using the Fuel Level sensor you can ensure that your tanks are filled and ready for the most critical moments.

The intelligent sensor port powers the sensor. It is compatible with any of the securityProbe series base units, or the E-sensor 8 expansion modules. You can instantly be alerted should there be any drop below critical levels in your fuel. Advance alerting of possible fuel leaks or theft will ensure your tanks never run dry again.

* Ideal for remote sites that depend on backup generator power
* Normal, Low and Critical alerting
* Easy setup and installation
* Can monitor several liquids, including fuel, oil and water
* Monitor your tanks for critically low levels of fuel
* Powered by the securityProbe, no additional power required

Working of the Fuel Level Sensor

Setup is simple, with the securityProbe autosense function and a simple 2-step calibration. Unlike other liquid float level sensors, calibration is performed to the sensor prior to mounting. No need to fill your tanks with water in order to calibrate the sensor, saving time, and mitigating harm to your engine caused by water left in the tanks.

Mounting the float assembly in the tank requires a 1.5? diameter hole to be drilled in the top of an empty tank. Clean the debris and then screw the self-sealing assembly into the hole.

The sensor comes with a 40ft (10.2 meter) weatherproof cable that connects the float level assembly to the sensor adapter. Custom lengths of up to 2,300ft (700 meters) are available upon request. A supplied 5ft CAT5 cable links the sensor adapter to the securityProbe base unit. This is extendable up to 100ft (30 meters) using standard CAT5 Ethernet cable The sensor configuration page in the securityProbe web based interface gives a simple and intuitive gauge of the current fuel level. The settings for the fuel level sensor are also found here. User definable thresholds for alerts, calibration and other advanced options are all found here.

The sensor configuration page in the securityProbe web based interface gives a simple and intuitive gauge of the current fuel level. The settings for the fuel level sensor are also found here. User definable thresholds for alerts, calibration and other advanced options are all found here.

Specification of the Fuel Level Sensor

			Measurement range: 0-100% of tank capacity
			Measurement accuracy: +/- 1%
			Sensor type: 30-240 Ohms variable resistance
			Power Consumption: 9-15 mWatts
			Requires Security Probe 5E or E-sensor 8 expansion module
			Communications cable: RJ-45 jack to base unit using UTP CAT5 cable.
			Communications cable Max. length: 100ft (30 meters)
			Float assembly lengths (depth of tank): 4 ? 60 inches in 1? increments (allow min 1? clearance in bottom of tank for safety margin)
			Mounting Method: 1.5? NPT American Pipe Thread (tapered) requires 1.5? hole in the tank.
			Supplied with 40 ft (10.2 meters) weatherproof cable from float assembly to sensor adapter. Custom lengths up to 2,300 ft (700 meters) are available upon request.
			Comes fully assembled, only needs calibration and installation.

Features of the Fuel Level Sensor

			Robust and durable float assembly
			Simple 2-Step calibration process, done dry prior to mounting the sensor.
			Power source: powered by the Sensor port. No additional power is required.
			Will report a critical state if the cable breaks, is cut, or unplugged.
			Measurement rate: one reading per second.
			Designed to work with all securityProbe and E-sensor8 expansion modules only
			Intelligent port auto-detects the sensor and type to facilitate easy configuration
			Full autosense including disconnect alarm

Compatible AKCP alarm server for this sensor

This sensor you can use with the following IP alarm servers:



AKCP securityProbe 5E	AKCP securityProbe-X20	AKCP securityProbe-X20DCW



AKCP securityProbe-X60	AKCP securityProbe X60DCW

Get in contact with Didactum®:

Didactum® Ltd. Deutschland
Marsweg 17
48163 Münster
Germany
Fon: +49 - 2501 - 9 71 63 55
Fax: +49 - 2501 - 9 71 63 56
http://www.didactum.com
e-mail: info[at]didactum[dot]com