The AKCess Pro / AKCP sensor gives the user a total maximum possible inputs of 10 dry contacts per sensorProbe2DC by using both of the RJ45 sensor ports.

Products

Control temp./hum.

A permanent monitoring of temperature and humidity in the server room is important. Even a short-term overheating may jeopardize the availability of your critical server systems.

SKU: 10157

Manufacturer: AKCess Pro

AKCP intelligent sensors

AKCP 5 Input Dry Contact Cable for sensorProbe2DC (SP2DC)

An optional feature of the sensorProbe2DC is the ability to monitor up to 5 dry contact inputs per RJ45. This gives the user a total maximum possible inputs of 10 dry contacts per sensorProbe2DC by using both of the RJ45 sensor ports.

Visit the compatitibilty list of AKCP intelligent sensors. The dry-contact ports of the sensorProbe2DC (SP2DC) can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but keep in mind that these ports can only be set to operate in the input mode.

Specifications & Features:

- Measurement range: - Alarm or Normal.
- Measurement rate - multiple readings every second
- Sensor type - open/closed contact switch
- Input voltage range 0 to 5 volts
- Normal input voltage is settable under software
- Normally open, normally closed is settable under software
- Communications cable - RJ-45 jack to sensor using UTP Cat 5 wire.
- Power source: powered by sensorProbe2DC. No additional power needed
- Up to 10 dry contact inputs in sensorProbe2DC.

Compatible AKCP alarm server for this sensor

This sensor you can use with the following IP alarm servers:



		AKCP sensorProbe2DC

Get in contact with Didactum®:

Didactum® Ltd. Deutschland
Marsweg 17
48163 Münster
Germany
Fon: +49 - 2501 - 9 71 63 55
Fax: +49 - 2501 - 9 71 63 56
http://www.didactum.com
e-mail: info[at]didactum[dot]com

Control temp./hum.

AKCess Pro 5 Input Dry Contact Sensor

AKCP intelligent sensors

Specifications & Features:

Compatible AKCP alarm server for this sensor

Get in contact with Didactum®: